Panasonic RX-ED77 Operating Instructions Manual page 27

v i - aaaytaffiaya
Using the Recording Timer
To play music after programming: (after step 6)
0 Begin play of desired music source.
Programming for the recording time remains in the memory even
if the volume or source is changed during play.
(
2
) After playing music, turn the unit off.
Direction displayed when emit is turned off is activated in the
recording timer. After playing music, check the direction (£•> or
<3) of the cassette to be recorded before turning the unit off.
To change the radio station to be recorded:
Press REC TIMER to clear the I
RECI
indicator and follow steps 5 to 7.
To use the timer at the same time daily:
Check that I
RECi
is displayed and turn the unit off.
Always turn the unit off before the programmed start time. The timer
does not activate if unit is on.
To check programmingv
Play and recording timer programming can be checked.
Press TIMER ADJUST when unit is off.
The display automatically changes in the following order.
Display example: Play tape from 7:00 to 8:30 on play timer A. 0
® Programmed time
(
2
) Programmed music source
fcLdl ((oj51) and £> (<3) are not displayed when batteries are
used as the power source.
(3) Timer volume
(3) Original display
Using the play and recording timers ini
combination
Example: Waking up to a cassette in the morning and record¬
ing radio programing while away E
© Program play timer (A or B) for cassette play (page 24).
(
2
) Program recording timer for radio recording and insert recording
cassette into deck 2 (page 26).
• Insert the playback cassette into deck 1 and the recording cassette
into deck 2. In this case, the play timer operates only on deck 1.
When programmed times overlap
•When recording is programmed to begin during play timer
operation E
Cancels play and begins recording.
• When play is programmed to begin during recording timer
operation 0
Continues recording. The play timer is not activated.