Table of Contents
Advertisement
|
| Before Playback, make the one-time preparations A and B below.
BASIC VCR TO TV CONNECTIONS
This is the only connection you need for Playback.
|
PLAYBACK CONNECTION
Back of VCR
TYPE A ds ohm VHF)
Back ot TV
"Connect to VHF
TV terminal
a
VHF Connecting Cabte (supplied)
TYPE B (300 ohm УНЕ)
-Connect to VHF
* - TV terminals
See separate Basic Guide For VCR
Connections for additionai hook-up
details.
SELECTION
OF THE VCR OUTPUT
CHANNEL
(3/4)
Your VCR must control one TV channel permanently
just as a TV broadcast station does. To decide which
channel to use, select either channel 3 or 4 with the
Channel 3/4 switch on the back of the VCR. To avoid
local interference, the channel 3/4 switch position
you choose should match the number of the TV
channel that is not normally broadcast in your area.
If you have cable TV, select the channel that provides
the best reception. You can still watch your favorite
channels, see page 9 for normai broadcast channel
reception.
CHANNEL
• Be sure the VCR is plugged into an AC outlet.
To insert a video cassette
1. Hold the cassette, window side up, with the arrow
pointing away from you.
C
HOW TO INSERT AND REMOVE A VIDEO CASSETTE
2. Gently push the cassette in until the pull of the
VCR loading mechanism takes the cassette into
position.
|
Auto Power
e Should the VCR Power be off, cassette insertion
will power the unit on.
To Remove a cassette
EJECT Burton
1. Pres, the EJECT Eutton.
Auto Eject
e if the VCR Power is OFF, a cassette can still be
ejected by pushing the EJECT Button.
2. Remove the cassette.
|
Advertisement
Table of Contents
