Table of Contents
Advertisement
ОЕТАН $
The buttons described in the following details
(illustrated on pages 4, 5 and 6) are of various types.
Operation Buttons PLAY, RECORD, Specia! Effects,
Fast Access
|
Pressing one operation button cancels the others,
and pressing STOP ends any operation. .
Toggte Buttons VCR or TV, Counter or Clock, Power
and Timer Function
Pressing a toggle button usually turns a Social mode
ON and OFF; or selects two complimentary modes
one after the other.
Menu Buttons CLOCK, Timer Setting, PROGRAM,
ANTENNA SYSTEM SELECT
Pressing a menu button several times usually selects
a list of different functions or adjusts various counter
numbers.
• AC POWER
CORD
Connect to a 120 V 60 Hz AC outlet.
ANTENNA CONNECTION
(See separate Guide.)
|
• UHF ANTENNA
INPUT TERMINALS
|
(IN FROM ANTENNA)
Connect the UHF antenna to these terminals.
• УНЕ ANTENNA
INPUT TERMINAL
(IN FROM ANTENNA)
Connect the VHF antenna to this terminal.
|
• УНЕ ANTENNA
OUTPUT TERMINAL
|
(OUT TO TV SET)
|
Connect this terminal to the УНЕ antenna terminal on
|
the TV, using the VHF Connection Cable (supplied). |
* UHF ANTENNA OUTPUT TERMINALS
.
|
|
(OUT TO TV SET)
Connect these terminals to the UHF antenna
terminals on the TV.
AUDIO
Mutti-Piex BROADCAST
SYSTEM
|. INPUT AUDIO SELECTOR SWITCH
|
Use this switch to select the sound track you wish
to record, when the INPUT SIGNAL SELECTOR
is set to TUNER.
* MONO BUTTON
While recording weak Stereo Broadcasts, press
the MONO button for a monaural recording with
less noise. The MONO Indicator lights up on the
front panel.
AUDIO Multi-Plex BROADCAST INDICATORS
* AUDIO II INDICATOR
Lights up when a second audio program is i Being
received.
e STEREO INDICATOR
Lights up when a stereo program is being
received.
|
* MONO INDICATOR
i
|
|
Lights up when МОМО has been selected by the
- MONO Button.
+
= 33 –
• AUDIO OUT SELECT BUTTON
To select the type of audio sound and channel
combination you desire to monitor or playback for
the TV зревког, а кока
or AUDIO LINE
OUT.
* CASSETTE
COMPARTMENT
Cassette is inserted here.
CHANNEL
MEMORY
#.2
у
DAD
сыш
лыш
=..
e ADD/DELETE BUTTON
| Used during CHANNEL
MEMORY programming
|
to add or delete a selected CHANNEL.
e AUTO SET BUTTON
To scan receivable TV channels and memorize
these channels when CHANNEL MEMORY
Button is ON.
* ANTENNA SYSTEM SELECT BUTTON
|
Set the ANTENNA SYSTEM SELECT Button to
`
| the desired position (ТМ, CATV (NOR, HRC, IRC)]
| depending on your cable system. If a cable
system is not used, leave it in the TV position.
Once it is set, do not change the position, or
Channel Memory settings may change.
For reference
There are basically three types of cable systems;
i Normal, HRC, and IRC.
|1) The "Normal" system is the most commonly
| used and as the name suggests the frequencies
used for the various Cable channels аге the _
same as the frequencies used for the normal
broadcast channels.
The HRC system stands for Harmonically
Related Carrier. In this system the channel
frequencies are all offset from the normal
frequencies by a fixed amount.
The IRC system (is also called ICC system)
stands for incrementa! Related Carrier in this
system only channels 5 and 6 are offset in `
frequency.
• CHANNEL MEMORY BUTTON
To use CHANNEL MEMORY
this button is
normally OFF. For CHANNEL MEMORY
programming, set to ON to use ANTENNA
SYSTEM SELECT Button, AUTO SET Button or
CHANNEL ADD/DELETE Button.
2
~
* CHANNEL 3/4 SWITCH
Set to channel 3 or 4, whichever is not used for
regular TV broadcasting in your area to use your
TV as a VCR program monitor. (See page 3.)
• CHANNEL UP/DOWN KEYS
(Also for Unattended Recording)
To select VCR CHANNELS for viewing and/or
recording your preset TV broadcast stations.
Advertisement
Table of Contents
