Health O Meter 498KG Manual page 13

OPERATING INSTRUCTIONS
Function
ZERO
HOLD/RELEASE
BMI
UNIT
CLEAR
UP▲
DOWN▼
ENTER
Keypad
Turns scale on and off. Also used when entering Calibration or Options
mode.
Zeroes out or tares the scale prior to a weighing.
Holds the weight value of the patient on the display until the button is
pressed again to clear the value.
Prompts entry of height data to calculate patient's Body Mass Index
(BMI).
Toggles between pounds and kilograms. If weight measuring unit is
locked and Unit View setting is enabled, press and hold UNIT button to
briefly display the alternate weight measuring unit. Note: If Everlock
engaged the UNIT button is disabled.
Clears the incorrect height input when in BMI mode. Exits out of a mode
or process. Also allows for repeated weighing of the patient without
requiring the patient to get off the scale. Also used in Options mode.
Increases height input (0.5 in / 0.5 cm increments) in BMI mode or weight
in pre-tare mode. Also used to navigate Options.
Decreases height input (0.5 in / 0.5 cm increments) in BMI mode or
weight in pre-tare mode. Also used to navigate Options.
Accepts height value in BMI mode. Also used in Options mode.
Description
12
Back to Home Page
is
®