Health O Meter 498KG Manual page 12

SET UP INSTRUCTIONS (CONTINUED)
PU2 = E Enabling this feature means the scale will zero itself when it is powered on. After each use, the
scale will clear the weight of the patient and set itself back to the initial zero level it found on
start-up. Health o meter® Professional recommends keeping this setting as Enable.
2. Choose the setting you prefer and press CLEAR to save your selection and exit the Options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and then dashes. When
the display shows "0.0" the scale is ready to use.
®
Everlock
®
The Everlock feature allows the measuring unit to be permanently locked on the scale, disabling the UNIT
default setting is "disabled". Follow this procedure to engage Everlock
®
button. The Everlock
Warning: This lock is permanent and cannot be reversed.
Notes:
• Press CLEAR at any time to exit the Everlock
• Once Everlock
®
is engaged the Unt and UdP options will no longer be displayed when scrolling through the
Options menu.
• There is no method to undo Everlock
1. While the scale is turned off, press and hold the ENTER button then press and release the
button. Hold the ENTER button until "AOF=d" or "AOF=E" appears on the display. Use the ▲ or ▼ buttons
to advance the display screen until "ELC" appears. Press the ENTER button to change the setting.
ELC =d Default setting with Everlock
ELC = E Engages Everlock
locking procedure. If this is desired, follow the instructions below.
is selected, "PASS1" will appear on the display. This prompts the user to enter a password.
®
2. After Everlock
Press the following keys in this sequence:
BMI, ENTER, ▼, ▲
3. If entered correctly, "ELC=L" (if scale was in LB mode) or "ELC=6" (if scale was in KG mode) will appear
on the display.
4. Use the ▼ and ▲ keys to toggle between (L) Pounds and (6) Kilograms. When the desired unit is
displayed, press ENTER and "PASS2" will appear on the display.
5. This will prompt the user to enter the second password. Press the following keys in this sequence:
▲, ▼, ENTER, BMI
6. If entered correctly, the scale will display "ELC = L" or "ELC = 6," depending on the unit of measurement
that was selected. Everlock
®
procedure.
®
without sending the scale back to the manufacturer.
®
disabled.
®
. Once this option is selected, the display will prompt you to begin the
®
is now engaged.
11
Back to Home Page
®
.