Table of Contents
Advertisement
Item
Other
Resolution
Setting
Notice
Buzzer
Input Auto
Switch
Auto
Power Off
LED
Indicator
DDC/CI
Reset Mode
Resets the current or all picture modes.
Current
Mode
All Modes
Reset All
Resets all mode, color and geometry settings to the factory default
values.
If an S Switch is connected to your monitor while performing this
operation, the game mode settings saved on S Switch will be reset as well.
Unplug the S Switch first if you wish to keep the game mode settings on it.
Function
Sets whether to display the resolution notice of the
recommended resolution when a new input source
is detected by the monitor
Turns the tone of control keys on or off.
Sets to automatically detect the available input
source.
Sets the time to power off the monitor
automatically in power saving mode.
Determines the brightness of the LED indicator.
Allows the monitor settings to be set through the
software on the PC.
DDC/CI, short for Display Data Channel/Command
Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for remote
diagnostics.
Resets the current picture mode.
If the current mode is Gamer1 / Gamer2 /
Gamer3 and an S Switch is connected to the
monitor, the same mode on both the monitor and
S Switch will be reset.
Resets all picture modes.
If an S Switch is connected to your monitor while
performing this operation, the game mode settings
saved on S Switch will be reset as well.
58
Range
• ON
• OFF
• ON
• OFF
• ON
• OFF
• OFF
• 10 min
• 20 min
• 30 min
• ON
• OFF
• ON
• OFF
• YES
• NO
Advertisement
Table of Contents
