LG RH90V9 V N Series Owner's Manual page 14

INSTALLATION
14
the door down carefully from the cabinet
with the front side facing down to the floor.
WARNING
• Remove the lower screw first. The door may fall
on to the floor due to its weight and the door can
be damaged.
2
Remove 8 screws on the hinge assembly
from the door.
• There are 6 screws on the front and 2 screws
on the side.
3
Remove the 3 screws from the door latch
assembly which is fixed between the door
d
and the hinge assembly, and then remove the
screw which is fixed on the door hook.
4
Swap the position of the hinge assembly
b
the door latch assembly
the screws in reverse order.
• Tighten the screw in their proper position
referring from steps 2 to 4.
5
Remove the door catch
frame by removing 2 screws and then
assemble them on the opposite side.
c
6
Remove the 2 decorative screws from the
appliance frame and then assemble them on
opposite side.
and
c
and then tighten
d
from the appliance
e