Remove The Terminal Bracket; Remove The Power Module; Remove The Main Board - Haier L42C300c Service Manual

Service Manual
Model No.:

4-4 Remove the Terminal Bracket

Remove the six screw indicated on the
figure above by ○
Then put the terminal bracket to the side

4-5 Remove the power module

Remove the four screw indicated on the
figure above by ○
Then remove the power module

4-6 Remove the Main board

Remove the two screw indicated
on the figure above by ○
CN513,CN201,CN202,CN205,CN101
CN102,CN701,CN503,CN403,CN903
Disconnected the coupler
Remove the Main board
- 16 -