Remove The Terminal Bracket; Remove The Power Module; Remove The Main Board - Haier HL19KN2 Service Manual

4-4 Remove the Terminal Bracket

Remove the fi ve screw indicated on the
fi gure above by ○
Then put the terminal bracket to the side

4-5 Remove the power module

Remove the six screw indicated on the
fi gure above by ○
Then remove the power module

4-6 Remove the Main board

Remove the two screw indicated
on the fi gure above by ○
Disconnected the coupler CON4
CN16 CN17
CN6 CN5 CN4 CN8 CN2 CN3
Remove the Main board
- 16 -
Service Manual
Model No.: