Remove The Terminal Bracket; Remove The Power Module; Remove The Main Board - Haier HL26P2 Service Manual

Service Manual
Model No.:

4-4 Remove the Terminal Bracket

Remove the fi ve screw indicated on the
fi gure above by ○
Then put the terminal bracket to the side

4-5 Remove the power module

Remove the four screw indicated on the
fi gure above by ○
Then remove the power module

4-6 Remove the Main board

Remove the two screw indicated
on the fi gure above by ○
Disconnected the coupler CN405
J1 CN101
CN601 CN402
Remove the Main board
- 15 -
CN406 CN404 CN901