Advertisement
connection of the RM-E100V
The connection differs according to the connector or jack
of the recorder.
Notes
When the REMOTE connector of the video camera
recorder to be used is a stereo mini-mini type, connect
the supplied adaptor cord (5-pin to stereo mini-mini) to
the 5-pin connecting cord.
With connections {C], [E], [F] and [G], only the start
and pause of recording during automatic assemble
editing is controlled by this unit. The recorder cannot be
operated by pressing the <<, BE, Bm or Mm (tape
transport) button, or by the RECORDER
REC or VIDEO
EDIT button on this unit. However, for connections
and
, if the recorder is a Sony infrared remote
control VCR, you will be able to operate the recorder
with these buttons by performing connection
[D]
instead.
You cannot make more than one connection
simultaneously on the recorder's side. This unit will
control only one player and one recorder.
For connections {B] — [G] ; the [R] indicator and the
tape transport mode indicators for the recorder are not
displayed in the display window.
[A] When the recorder is equipped with the 5-pin REMOTE connector (with the configuration as illustrated below)
Player
Video camera recorder
Ex. CCD-V8 Video camera recorder
(Connection 1)
VIS selector > S
to REMOTE
> CTRLL
VTR-1/VTR-2 selector
— Either position
Recorder
—
Video camera recorder
Le |
| Ae
as
CTRL L/CTRL selector
aif
8)
to REMOTE
Supplied connecting
cord (5 pin +> 5 pin)
+ to CONTROL L
The [R] indicator and
the tape transport
mode indicator
RM-E100V
Advertisement
