Advertisement
Press the PREVIEW button.
Appears.
(P]
>
|
PREVIEW
H]
The next cut-in or -out point and
number of program
Rewind or fast forward to the point slightly ahead of the
preset cut-in point
Playback for approximately 5-10 digits of the tape
counter
Still picture of cut-in point for several seconds
Playback
Still picture of cut-out point for several seconds
The above is repeated consequently for each memorized
scene in the program number order.
After playback of the last scene, the tape will stop
automatically.
During playback in between the cut-in and -out points, the
picture can be scanned faster by pressing the B® button.
In still picture, fast forward or rewind mode, only the AC
button is operative. The other buttons will not function.
To repeat the same previewing
Press the PREVIEW button again.
To stop the previewing that is in operation
Press the PREVIEW button.
PNG Cia i celele liane)
To check the tape counter of the cut-'in and cut-out points
Press the <- PGM or PGM > button.
ST
—__________»
an ' 12121415}
617] 8
—_——_———_—_—__—_—X—XVM"='sS>""-"
Each time the PGM — button is pressed, the tape counter
indicates the cut-in and -out point of program ij to
program Eq successively.
When the <- PGM button is pressed, the sequence is
reversed.
For the program number into which nothing is preset
"-———" ig displayed.
The tape counter will automatically return to the counter of
the player after several seconds.
To change the program
1 Press the -— PGM or PGM — button until the tape
counter of the cut-in or -out point you desire to change
is displayed in the display window.
2 Press the PLAYER button, and then the & button to
start playback.
3 Re-locate the desired cut-in or -out point to be set, and
then at that point, press the I button and the PGM
MEMORY button.
Repeat steps 1-3 for each point to be changed.
To erase the memory of a certain program
=A
C (Clear) button
1 Press the — PGM button or the PGM — button until the
cut-in point of the program to be erased is displayed on
the tape counter.
2 Press the C button. The counter indicates "~~-—" for
several seconds, then returns to the tape counter for the
player.
3 Press the PGM — button once to display the cut out
point of the program.
4 Press the C button. The counter indicates "--——" for
several seconds, then returns to the tape counter for the
player.
The program is now erased from the memory.
For each program to be erased, repeat the same
procedure.
19
Advertisement
