Advertisement
Program Play
— To play back the memorized scenes automatically
To erase the memory of all the programs
Ff
AC (All clear) button
Press the AC button.
The counter indicates "-—-——" for several seconds, then
returns to the tape counter for the player. The CUT IN
indicator appears and program number Mil blinks.
To check the total time of all the scenes to be edited
When the player is equipped with a "time" counter
(6-digits counter with H, M, S indicators) the
approximate total time of all the scenes to be edited
will be displayed by pressing the LAP button. This
function is useful when you want to know if the tape is
long enough for recording.
(P]
iR]
LAP
4
"
s
Appears.
When the player is not equipped with a time counter,
the "-———" is indicated on the counter.
To return to the tape counter for the player, press the
LAP button again.
20
The memorized scenes can be piayed back in sequence as
BGV (Background Video).
After performing steps 1 to 8 of automatic assemble
editing (page 17), press the PGM PLAY button.
PGM
PLAY
Gi
mom
or
en
ee
The next cut-in or -out
Appears.
point and program number
The tape will be wound to the point slightly before the
memorized cut-in point (by approximately 5-10 digits of the
tape counter) and playback begins. When the tape reaches
the cut-out point, the player automatically goes into fast
forward or rewind mode to locate the next scene. For each
memorized scene, the same procedure is repeated. After
playback of the last scene is completed, the tape stops.
To repeat program play, press the PGM PLAY button again.
To stop the program play, press the PGM PLAY button.
Advertisement
