3 WORK
3.19
30
311910-10
Installing the engine guard (All special models incl. XW-F)
H01638-10
Preparatory work
–
Remove the seat. (
p. 19)
–
Disconnect the negative cable of the 12-V battery. (
Main work
–
Connect a battery charger to the 12-V battery. Adjust the bat-
tery charger.
EU battery charger XCharge‑professional (00029095050)
Alternative 1
US battery charger XCharge‑professional
(00029095051)
Alternative 2
UK battery charger XCharge‑professional
(00029095052)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
Finishing work
–
Connect the negative cable of the 12-V battery. (
–
Mount the seat. (
p. 19)
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
3 months
p. 27)
1
.
M6
10 Nm (7.4 lbf ft)
p. 27)