3.4
Installing the headlight mask with the headlight
3.5
Checking the headlight setting
–
Detach plug-in connectors
with the headlight.
W00350-10
Main work
–
Join plug-in connectors
W00350-11
–
Position the brake line and wiring harness in the brake line
guide.
–
Position the headlight mask.
The holding lugs engage in the fender.
–
Mount and tighten screws
Guideline
Remaining nuts,
chassis
W00349-11
Finishing work
–
Check the headlight setting. (
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertically at a distance
wall.
400726-10
Guideline
A
Distance
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
2
and take off the headlight mask
1
.
2
.
M6
10 Nm (7.4 lbf ft)
p. 17)
B
under the first marking.
5 cm (2 in)
A
away from the
5 m (16 ft)
WORK 3
17