Table of Contents
Advertisement
Using the Clock Display
Parts Identification
(Fig. 7)
112) Clock
{17} 1 button: hour adjustment
11712 Buttan:
minute adjustment
Displaying the Time
The clock is displayed when button [12] is pressed
Press button [12] again to switch off the clack display.
+
The clock display can be used only when the main
unit is in operation.
*
When the clock
is being displayed, pressing any
other button will end the clock display. The clock
will be displayed again about 25 seconds after the
last button is pressed.
Adjusting the Time
Adjusting Hour
While halding down button [12], press button 1 of the
buttons shown on [17], to adjust the hour setting.
h time button 1 is pressed, the hour advances by
one hour, Holding down button 1 advances the hour
at high speed.
Adjusting the Minutes
While holding down button [12], press button 2 of the
buttons shown an {17] to adjust the minute setting.
Each time
button 2 is pressed, the minute advances
by one minute. Holding down buttan 2 advances the
minute at high speed.
Advertisement
Table of Contents
