Local Control - Kawai MR210 Owner's Manual

*x The MULTI TIMBRE mode is off when the power is turned on.
(4) Leave the programming mode. (see p. 7)
D. LOCAL CONTROL
This mode is used to set whether the sound from the piano's keyboard will be
played or not, and is called the LOCAL CONTROL ON/OFF mode.
(1) Make sure that the piano is in the programming mode.
After turning off the MULTI TIMBRE mode, press the E. PIANO switch.
The flashing LED will change from PIANO 2 to E. PIANO.
(2) Press the highest white or black key to turn LOCAL CONTROL on or off.
White key (ON): The piano will output sound when the keys are struck.
Black key (OFF): Sound will be output only when MIDI data is received, and not
when the keyboard is played.
*x You can also turn this on by turning the power off and then on again,
instead of using the highest key as described above.
(3) Press the CHORUS switch to leave the programming mode.
21