Table of Contents
Advertisement
B. Sending a program number (timbre code)
(a) Transmitting with the TONE SELECTORs
You can use the eight TONE SELECTORs during normal playing to transmit
program number 0 through 7 shown in the chart below.
PIANO 1
PIANO 2
E. PIANO
JAZZ ORGAN
FULL ORGAN
HARPSICHORD
Transmission with these TONE SELECTORs can be switched on and off as
described below.
(1) Enter the programming mode (see p. 7).
The LEDs for CHORUS and PIANO 1 will flash. The flashing of the PIANO 1
LED shows that the instrument is in the programming mode for transmitting the
program number, so move on to the next step.
*
No sound will be played if the keyboard is pressed at this time.
(2) Press the highest black or white key.
ON
Pressing the black key (OFF) disables transmission by the TONE SELECTORs.
Pressing the white key (ON) enables transmission.
Advertisement
Table of Contents
