Table of Contents
Advertisement
(3) Press the CHORUS switch to leave the programming mode.
You may then change to another programming mode.
X The setting described above is automatically set on when the power
is turned on, so you can also turn the setting simply by turning the
power off and then on again, instead of using the procedure de-
scribed above.
(b) Using black keys
In addition to transmission with the TONE SELECTORS, you can also use the
black keys on the instrument to send program numbers 0 through 127.
. Procedure
(1) Make sure that the digital piano is in the programming mode. (see p. 7)
The flashing LED of the PIANO 1 switch indicates that the interface is ready to
transmit a program number.
Flashing
ES
PIANO 1
(2) Select the program number by pressing the corresponding pair of black
keys at the lower end of the keyboard.
There are a total of 128 numbers possible: the first thirteen black keys give the
first and second digits ("00" - "127") of this three digit numbers; the next ten, the
final digit ("O" - "9").
19 20
30 40 50
60
70
80 90 100
110 120
Eo
First two digits
|
ases
Final digit —
|
«Note:
You must press the two keys in order from left to right.
Advertisement
Table of Contents
