Kawai MR210 Owner's Manual page 10

(4) After selecting your touch curve, press the CHORUS button.
This takes you out of the "Programming Mode" (See p. 7). You can now move on
to other set up modes.
«Note: When you turn on the power, the touch curve is set at Normal.
c Procedure
(1) Make sure that the piano is in the programming mode.
(2) Press the CLAVI switch so that it flashes to indicate that the piano is
ready to be tuned. Flashing
3
CLAVI
(3) Unlike the other functions in the programming mode, this one produces
sound so that you can compare the piano's pitch with another instrument.
Playing the keyboard when set up this way produces the timbre
selected before entering the programming mode. Tuning is done
using this timbre. If you want to change the timbre, leave the
programming mode (see p. 7), select the new timbre and repeat
steps (1) and (2).
(4) Press the highest black key to lower the pitch.
Or press the highest white one to raise it.
lt may be necessary to press these keys repeatedly to achieve proper tuning.
UP
DOWN
(5) Leave the programming mode.
«Note: Momentarily turning off the power restores the original pitch.
9