Wash Cycles And Options; Table Of Wash Cycles; Wash Options - Whirlpool WRWD582WAU Instructions For Use Manual

Wash cycles and options

Table of wash cycles

Description of the wash cycle
Daily
1 White Prewash: extremely soiled whites.
2 White Cotton: heavily soiled whites.
2 White Cotton (1): normally soiled whites and resistant colours.
3 Cotton: heavily soiled whites and resistant colours.
4 Coloured Cotton: lightly soiled whites and delicate colours.
5 White Nylon: lightly soiled resistant colours.
Special
6 Wool: for wool, cashmere, etc.
7 Silk/Curtains: for garments in silk and viscose, lingerie.
8 Jeans
9 Sport Light
10 Sport Shoes
Dry
11 Cotton (2)
12 Synthetics
13 Express Wash&Dry
Partial
Rinse
Spin
Drain
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
(1)Test wash cycle in compliance with regulation AS/NZS 2040.2: set program 2 with a temperature of 60°C at 1200rpm.
(2) Test drying cycle in compliance with AS/NZS 2442.2: set program 11 with "A4" dryness level.

Wash options

- If the selected option is not compatible with the
programmed wash cycle, the indicator light will flash and
the option will not be activated.
- If the selected option is not compatible with another
option which has been selected previously, the indicator
light corresponding to the first option selected will flash
and only the second option will be activated; the indicator
light corresponding to the enabled option will remain lit.
Eco
Selecting this option enables you to suitably adjust drum
rotation, temperature and water to a reduced load of lightly
soiled cotton and synthetic fabrics (refer to the "Table of
wash cycles"). "Eco" enables you to wash in less time
thereby saving water and electricity. We suggest using a
liquid detergent suitably measured out to the load quantity.
Intensive Wash
Because a greater quantity of water is used in the initial
phase of the cycle, and because of the increased cycle
duration, this function offers a high-performance wash.
Temperatures
Max.
speed Drying
(rpm)
Default Range
90° – 90° 1200

–
90° 90° 1200

60° 60° 1200

–
60° 60° 1200 
–
40° 40° 1200 
–
60° 60° 1000 
–
40° 800 -
40°
–
30° 0 -
30°
–
40° 800
40° 
–
30° 600 -
30°
–
30° 800 -
30°
- - -

- - -

–
30° 30° 1200

- - 1200

- - 1200 
- - 0 -
Easy iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the Washer-dryer will perform slow
rotations of the drum; the indicator lights for the EASY
IRON and START/PAUSE options will flash (the first one
green, the second orange).
To end the cycle, press the START/PAUSE button or the
EASY IRON button.
For the 7 wash cycle, the machine will end the cycle while
the laundry is soaking and the EASY IRON and START/
PAUSE indicator lights will flash. To drain the water so that
the laundry may be removed, press the START/PAUSE
button or the EASY IRON button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level "A1" (Iron dry).
Start Delay
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text "OFF"
appears on the display.
Detergents
Max.
load
Fabric
(kg)
Prewash Wash
softener
7
  
- 7
 
- 7,5
 
7
-  
7
-  
4.5
-  
2
-
 
- 1
 
- 4
 
- 4
 
Max. 2
-
 
pairs
- - - -
- - - -
- 0,5
 
- - 7,5

7,5
- - -
7,5
- - -
GB
Max.
Load of Cycle
drying duration
cycle
4,5
4,5
4,5
4,5
4,5
4
-
-
3
-
-
4,5
4
0,5
4,5
4,5
-
9