Advertisement
Cleaning and storing
Make sure to turn off the power and
disconnect the power plug when
WARNING
cleaning the product.
Injury or electric shock may occur due
to inadvertent operation.
Do not splash water on it when wiping.
WARNING
It may cause fire or electric shock due
to short circuit.
1.
To prevent the risk of electric shock, please
disconnect the power plug before cleaning.
2.
In order to increase the efficiency and safety
of the machine, please regularly maintain and
clean the cooling holes on the rear shell.
(about once a month).
3.
When disassembling, assembling,
maintaining or cleaning the front guard,
blade and rear guard, please disassemble
them in the reverse order of assembly. See
page 6~9 of the instructions.
4.
For the maintenance of the blade and main body,
please use a soft cloth dampened with warm
water or neutral detergent to wipe them clean,
and then dry them with a dry cloth.
CAUTION
5.
After the motor shaft is wiped clean, in order
to prevent rust, please apply lubricating oil
on it and store it in a place with little
humidity.
6.
Storing
Please put the plastic cover on the motor
shaft when storing it to prevent the motor
shaft from rusting.
When storing, please follow the original
assembly steps, disassemble it in the reverse
order of assembly, put it back in the original
box, and keep it in a dry and cool place.
13
Reminder
Do not use volatile solvents (gasoline,
lacquer thinner...), alkaline soapy water,
hot water, etc. to wipe the machine.
Cracks of the blade may occur and it may cause
injury. Change of properties or color of plastic
parts may occur. Falling parts may cause injury.
After product is purchased for more than 3
years, the power cord may be damaged or
dust may accumulate, which may cause
various unpredictable damages. In order to
prolong the service life of the machine,
please send the machine to the direct service
center or dealer for inspection on a regular
basis.
Thinner
Motor
Cap
shaft
Advertisement
