Table of Contents
Advertisement
INSTALLATION (NEW CONSTRUCTION)
Insert fan body
Assembled
view detail
Hook
Secure fan body
Plug connector
Receptacle
2
Machine screw (M4X8)
MAINTENANCE (CLEANING)
WARNING
Disconnect power supply before working on unit.
CAUTION
Routine maintenance must be done every
year. Please wear gloves during the
cleaning work.
Never use gasoline, benzene, thinner or
any other such chemicals for cleaning the
ventilating fan.
Remove grille
Mounting spring
Gloves
1
Remove grille by pulling down one mounting spring, then pull the other.
Guide parts
Joist
2 self-drilling screws
1
Slot
Joist
1
Guide parts
Flange
1
Do not immerse motor in water when
cleaning. Do not soak resin parts in
water over 140° C (60° F).
Mounting spring
Grille
Insert fan body and slide into adaptor
1
assembly using the guide parts until
you hear a click from the hook.
When the flange overlaps Flex-Z Fast™
1
bracket, secure it by using 2 self-drilling
screws.
Plug connector into receptacle and secure
2
fan body to adaptor by using the machine
screw (M4X8).
Follow the step 7 to 8 in INSTALLATION
3
(RETROFIT)
Drywall
10
Hide quick links:
Advertisement
Table of Contents
