Advertisement
Maintenance and storing
Make sure to turn off the power and
disconnect the power plug when
WARNING
cleaning the product.
Injury or electric shock may occur due
to inadvertent operation.
1.
To prevent the risk of electric shock, please
disconnect the power plug before cleaning.
2.
In order to increase the efficiency and safety
of the machine, please regularly maintain and
clean the cooling holes on the rear shell.
3.
When disassembling, maintaining or
cleaning the front guard, blade and rear
guard, please disassemble them in the
reverse order of assembly. See page 6~9 of
the instructions.
4.
For the maintenance of the blade and main body,
please use a soft cloth dampened with warm
water or neutral detergent to wipe them clean,
and then dry them with a dry cloth.
CAUTION
5.
After the motor shaft is wiped clean, in order
to prevent rust, please apply lubricating oil
on it and store it in a place with lower
humidity.
6.
Storing
Please put the plastic cover on the motor
shaft when storing it to prevent the motor
shaft from rusting.
When storing, please follow the original
assembly steps, disassemble it in the reverse
order of assembly, put it back in the original
box, and keep it in a dry and cool place.
13
Do not use volatile solvents (gasoline,
lacquer thinner...), alkaline soapy water,
hot water, etc. to wipe the machine.
Cracks of the blade may occur and it may cause
injury. Change of properties or color of plastic
parts may occur. Falling parts may cause injury.
Do not splash water on it when wiping.
WARNING
It may cause fire or electric shock due
to short circuit.
Thinner
Motor
shaft
Cap
Advertisement
