Table of Contents
Advertisement
Installing Features on the 5371 System Unit
Figure 32 shows the configurations of the 5371 System Unit Models 12, 14,
and 16 with no features installed. All the items (except basic memory) are
on cards that plug into slots on the system card of the 5371. The position of
each card is shown in the "System Unit Slot" column. (An asterisk
indicates that a card is present.)
System
Item
Model Model Model
Unit Slot
12
14
16
System card Basic memory
256K
256K
256K
1
Display Unit Adapter
*
*
*
2
3270 System Adapter
*
*
*
3
Memory
128K
256K
256K
4
Keyb'd/Tablet/Mouse Adapter
*
*
*
5
Fixed-Disk Adapter
*
6
Diskette Adapter
*
*
*
7
Printer Adapter
*
*
*
8
Figure 32.
Configurations for the 5371 System Unit Models
The features can be installed only in specified slots of the system unit. Use
Figure 32 and the information given below to configure your features and
to decide whether you need an expansion unit.
Note: In certain instances, certain combinations of features might not be
possible because a required slot is already occupied.
•
IEEE-488 Adapter - install in:
Slot 8 (if available) of the 5371 System Unit, or
Slot 5 (if available) of the 5371 System Unit, or
Slot 6 of the 5161 Expansion Unit.
•
Asynchronous Communications Adapter - install in:
-
Slot 8 of the 5371 System Unit.
•
64/256KB Memory Expansion Option - install in:
Slot 5 (if available) of the 5371 System Unit, or
Slot 2 of the 5371 System Unit if an expansion unit is installed; see
also "5161 Expansion Unit Model 1" below.
Chapter 6. Choosing the Configuration
71
Advertisement
Table of Contents
