IBM 3270 G Manual page 106

CCC is the 3274 model specified in sequence number 151. If the model
being used can be either SNA or non-SNA, the system type is also
listed in this field.
906 is the response verification field. Once you have entered all your
port assignments, change the 0 to a 1 and press the ENTER key.
If your entries are syntactically correct, the Port Address Table
(118) will be displayed. If there are errors in your entries, an
operator code will appear in the NNN field, and your erroneous
entries will be highlighted. If you want to return to the initial
customizing screen, change the 0 after 906 to an A and press the
ENTER key.
• 118 Port Address Table (Configuration Support D Only)
This table is displayed to allow you to see the port assignments you set
in number 117. For example:
118 CCC
C@ ..
AOO
A01 A02 A03 A04 A05 A06 A07
#IS. 1 4 2
4 1 3 0
0
P@ ..
002 003 004 005 006
007
S@ .. 008-01A 008 OOC-OOE
OOF-011
C@ ..
AOB A09
A10 A11 A12 A13 A14 A15
#IS. 0 0
0
0
0
0
0
0
P@ ..
S@ ..
C@ .. A16 A17 A18 A19 A20 A21 A22 A23
#IS. 0 0 0 0
0 0 0
0
P@ ..
S@ ..
C@ ..
A24
A25 A26 A27 A28 A29 A30
A31
#IS. 0
0 0 0 0 0 0
0
P@ ..
S@ ..
907-0
Where:
C@ is the physical 3274 port.
#IS is the number of devices you want to assign to the port. You will
need this information to customize the work station. AOO has a
fixed response of 1. (3290 Information Panels and the 3270 PC, in
DFT mode, cannot be this port.) All other ports can be assigned
one through five devices if a 3290 with a multiple screen is
attached, or one through four devices if a 3270 PC with a multiple
screen is attached.
P@ is the primary address assigned to the device.
S@ is the range of secondary addresses assigned to the device.
96
Introducing the IBM 3270 Personal Computer/G and /GX Work Stations