Table of Contents
Advertisement
CCC is the 3274 model specified in sequence number 151. If the model
being used can be either SNA or non-SNA, the system type is also
listed in this field.
907
is the response verification field. If you are satisfied with the
port addresses shown, change the 0 after 907 to a 1 and press the
ENTER key. If you want to return to the Port Address Table
(sequence number 117), change the 0 after 907 to an A, press the
ENTER key, and proceed as you would in sequence number 117.
•
125 Miscellaneous Feature Options (Configuration Support D
Only)
This sequence number refers to any additional features you may have,
for example, the Dual-Function Clear key (RPQ #8K0978). You will
need this information to customize the work station. If you have
Configuration Support D and you want this function, you must indicate
"1" in bit 0 in response to sequence number 125.
This sequence number also refers to Unsupported Control Code
Translate (RPQ #8K0980). You will need this information to customize
the work station. If you want this function, you must indicate "1" in bit
1 in response to sequence number 125.
•
170 Distributed Function Terminals
Your response to sequence number 170 reflects the inclusion of the 3270
PC in the 3274 configuration. The answer to sequence number 170 will
be "1" if you will be supporting a 3290 Information Panel as well as the
3270 PC, or "2" if you will support only a 3270 PC. You will need this
information to customize the work station.
•
171 Multiple Interactive Screens (Configuration Support T Only)
The sequence number is displayed as follows:
171
xx xx xx xx xx
The first column of XX shows the starting coaxial address. The second
column shows how many 2-host session devices, the third shows how
many 3-host session devices, the fourth shows how many 4-host session
devices, and the fifth shows how many 5-host session devices. The
following is an example of a possible response:
171 08 03 02 01 00
You will need this information to customize the work station.
Appendix A. Attachment to an IBM
3274
Control Unit
97
Advertisement
Table of Contents
