Advertisement
DISPLAY
REMOTE CONTROL
jhs Im;: ssj? jjfs la;; gai ;;sj8 mS SSS5 5SSS SSg SSS iSal n;a
MmH
TOTAL TRACK ABS AUTO WRITE QE)
UjMMnniMiiiMitnnniniinimitntininiiiiMiinmn
D CC
lights up when a DCC cassette is loaded
TRACK NO.
indicates the current track number (only
when using DCC cassettes)
TOTAL
lights up when the total time mode or total
remaining time mode is selected (only
when using DCC cassettes)
TRACK
lights up when the track time mode is
selected (only when using DCC cassettes)
ABS
lights up when the absolute time mode is
selected (only when using DCC cassettes)
AUTO
lights up when the automatic marker
recording mode is selected.
(only when using DCC cassettes)
WRITE
lights up when markers are written on the
tape, (only when using DCC cassettes)
B
lights up during playback of side B of a
DCC cassette and starts blinking during
the search/skip mode on side B.
A
lights up during playback of side A of a
DCC cassette and starts blinking during
the search/skip mode on side A.
starts blinking when the battery runs
down.
Multi function
- indicates the peak level.
Level Meter
(only when using DCC cassettes)
- indicates the winding direction and
current position during search.
This remote control to be connected to the headphone cord
gives easy control of volume and track access.
The buttons on the remote control have the same function as
the ones on the DCC player.
■ STOP/OFF_
• to stop the tape transport
•
in stop mode: to
turn off the power
•
in power off mode: to
start charging the battery
A ► PLAY/SIDE_
• for starting playback and for changing the playback side of
the tape
F^W_
•
in stop mode: to
advance the tape forward
•
during playback: to
skip to the next track. If you press
this button several times, the forward step increases by
one music track for each depression of the button
/Vote;you can skip 99 tracks in forward or reverse direction.
_
•
in stop mode:Xo
rewind the tape
•
during playback: to
skip to the start of the current track.
If you press this button several times, the backward step
Increases by one music track for each depression of the
button.
HOLD button_
This button can be used to switch the HOLD function of the
remote control on and off.
This button acts Independently from the HOLD switch on the
DCC player.
REG P slider_
This slider can be used to select the recording pause mode
(RECP).
(Only when using DCC cassettes)
VOLUME control_
Use this control to adjust the volume.
When you wish to adjust the volume via the remote control,
set the volume control on the DCC 170 to position 5.6 or 7.
Afote.'When adjusting the VOLUME on the remote control,
the volume cannot be turned down completely.
7
Advertisement
