Advertisement
Bias voltage for Deck 2
Erase voltage for Deck 2 more than 80mV
12.1.3. Bias Frequency Adjustment (Deck 1/2)
1. Set the unit to "AUX" position.
2. Insert the Normal blank tape (QZZCRA) into DECK 2 and set the
unit to "REC" mode (
3. Adjust L1002 so that the output frequency is within the standard
value.
Standard Value: 97
±8 kHz
12.2. Tuner Section
12.2.1. AM-IF Alignment
- AM-IF ALIGNMENT
14 ± 4mV (Normal)
use "REC/STOP" key).
33
Advertisement
