Advertisement
No.
Error
1
REST SW detection error
2
CD tray opens automatically
3
Does not startup when
[PLAY]
button is pressed
4
Transmission error
between CD
servo LSI and micon
5
Startup fails even when you
insert CD or the selected
disc tray
does not open
6
Cannot insert CD
7
Cannot eject CD
8
The CD tray closes
10.3. Power Supply related error detection
No.
Error
1
POWER AMP
output abnormal
11. CD Test Mode Function
This CD test mode is provided to check CD unit without connecting to changer loading
mechanism. This mode shall operate CD PLAY with CD unit being connected only and CD
Automatic Alignment result is shown on FL display.
11.1. How to set CD test mode
Error
Problem condition
Display
F15
CD does not function.
This error occurs when the Optical Pick Up REST
(S701) is not
detected within the specified time (about 8 seconds)
F16
CLAMP switch (S4) NG (Check & Replace)
F17
BOTTOM switch (S5) NG (Check & Replace)
F26
CD does not function.
This error occurs when the POWER is ON for the
block and an error is
detected after the transmission has started.
F27
Tray 1 detect switch or Tray 2 detect switch NG (
& Replace)
F28
Tray 1 detect switch NG (Check & Replace)
F29
Check if disc is stuck. Tray 2 detect switch NG
(Confirm & Replace)
H15
CD disc tray detect switch NG (S3) (Check & Replace)
Error
Problem condition
Display
F61
When POWER is switched on, power become off
automatically.
During normal operation, if DC DET become L, PCNT
shall become
L and the error display on the left shall be displayed.
(IC501)
30
Advertisement
