Table of Contents
Advertisement
Hotel TV Function
Category
Item
Self
Diagnosis
for TV
Self
Diagnosis
for
HTV
System
SW
Update
Service
Pattern
Sound Bar
Out
Contact
Samsung
Standby
LED
TV Reset
NOTE
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
Initial value
Enter Self Diagnosis Menu.
•
Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on
the screen.
•
Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
HD Function Check Menu On Executing Item Below OSD is displayed
ProIdiom DTV Channel Key Loss : Ok/Failure (Hotel US) STB SI
Vendor
•
Setting : SI Name Ok/Failure
•
Bathroom AMP : Ok/Failure (Hotel EU)
•
RTC : Ok/Failure (Hotel EU)
•
PC Audio Test : Ok/Failure
•
PC Self Test : Ok/Failure
SW USB Update function
OFF
Same function with SVC Service Pattern
ON: TV speaker sound will be mute. Sound will come out through
HDMI.
OFF
You must connect the Sound Bar to hear the sound.
•
OFF: Sound will come out through TV speakers normally.
Display the web site of related Samsung service center, software
version, and Mac address information.
When the TV is in standby mode, you can configure the settings of
external LED.
ON
•
ON: The LED is on.
•
OFF: The LED is off.
•
Returns all settings on the TV to their factory defaults.
2. Product specifications
Description
2-39
Advertisement
Table of Contents
