Table of Contents
Advertisement
2. Product specifications
Hotel TV Function
Category
Item
HP
Main
Management
Speaker
Energy
Eco Solution
Saving
Welcome
Message
Edit
Welcome
Message
Hospitality
Logo
Logo/
Message
Hospitality
Logo DL
Logo
Display
Time
Clone TV
to USB
Clone USB
to TV
Cloning
Setting
Auto
Intialize
REACH
REACH IP
Mode
Server IP
Setting
REACH
Channel
REACH
Solution
REACH
Update
Time
REACH
Update
Immediate
2-36
Initial value
•
ON: Plays the TV sound through the TV speaker.
ON
•
OFF: Plays the TV sound through the headphones only.
Adjusts the brightness of the TV to recduce power consumption.
•
Off: Turns off the energy saving function.
OFF
•
Low: Sets the TV to low energy saving mode.
•
Medium: Sets the TV to medium energy saving mode.
•
High: Sets the TV to high energy saving mode.
OFF
displays on Welcome Message.
Edit the Welcome Message.
Turns the Hospitality logo feature On or Off, if On, when the TV isturned
OFF
on, the Logo is displayed, before the signal from the initial source, for
the amount of time set in "Logo Display Time"
Downloads the Hospitality logo. Hospitality logo file requirements:
•
BMP or AVI files only.
..
•
Max file size : BMP - 960 X 540. AVI - 30MB.
•
The file can only be named samsung.bmp or samsung.avi.
..
•
Set the logo display time (3/5/7 Seconds).
Clone the current TV option values to a USB memory device.
Clone the saved TV option values in a USB memory device to the TV.
When Setting Auto Initialize is set to On, and the power is turned off
and on or the Master Power is turned off and on, the data is restored
OFF
to the cloned values. If there is no cloned value, even when the Setting
Auto Initialize is set to On, it will be ignored and the operation will be the
same as that whenSetting Auto Initialize is set to Off.
•
ON: The feature of REACH in this TV becomes available.
OFF
•
OFF: The feature of REACH in this TV becomes not available.
...
If enabled, Reach will work over IP instead of RF.
...
The URL of the Reach IP server, for example https:\\192.168.1.2:443.
Assign a DTV channel number to carry the update REACH data. This
...
channel number must be the same as the number set on the Reach
server.
Lets you set when data such as updated SW, cloning files, and S-LYNC
REACH contents is downloaded from the REACH server to the TV :
...
1hour: Every hour / 2hour: Every 2 hours / 12:00 AM: every 12:00 a.m. /
2:00 AM: every 2:00 a.m. / 12:00 PM: every 12:00 p.m. / 2:00 PM: every
2:00 p.m.
•
ON: Whenever the TV enters standby mode (the power cord is
plugged in and the power is off), the REACH data is updated on the
TV.
...
•
OFF: The REACH data is only updated on the TV at the REACH
server update time.
Description
Advertisement
Table of Contents
