Table of Contents
Advertisement
Hotel TV Function
Category
Item
Group ID
Room
REACH
Number
Solution
REACH
Config
Version
Network
Setup
Network
SmartHub
Model
Setting
SmartHub
Setting
Service
Discovery
Lan Out
VLAN ID
Solution
VLAN ID
Device
VLAN ID
Widget
Mode
Solution
Type
Server
Widget
URL
Solution
Setting
License
Server IP
Setting
IPTV Mode
Initial value
Select the Group ID of the REACH server. (Refer to the REACH server
...
manual for more details.)
...
et the Room Number.
...
The version of REACH is displayed.
Set an IP address to establish an Internet connection.
Soft AP: Using this function, you can connect the TV on your mobile
devices. Set the options for connection of Wi-Fi device.
•
Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your
mobile devices can find the TV name in Wi-Fi connection list.
•
Security key: Set a security key that you need to enter on other
devices so they can connect to the TV.
Input the generated security key into the device you want to
-
connect.
If network does not operate normally,check the security key
-
again. An incorrect security key may cause a malfunction.
•
Soft AP may not be available if it is not supported by the model.
•
Maximum number of devices that can be connected: 4 devices.
•
Bitrate : 10 Mbps/device.
•
The specifications above are based on our in-house testing. Actual
performance may vary depending on your wired/wireless network
environment.
Set Smart Hub Model.
Set up Smart Hub.
If this option is set to On, you can share content with other devices,
On
such as smartphones, in DLNA mode.
Enable/disable LAN Out. When enabled, the TV can work as a wired
OFF
router for other network devices.
Create separate VLAN groups. A 3-digit number can be entered
...
between 1 and 255 for the VLAN ID.
When VLAN is used, set a VLAN ID to be assigned to a Solution (such
...
as SYNC,H.Browser etc.).
Set a VLAN ID to be assigned to external devices connected to the LAN
...
OUT port.
ON
Widget Mode On/Off.
Vendor
Select type of solution (Vender Server/ SINC Server).
Server
Set server URL.
...
Set server IP.
ON
IPTV mode On/Off.
2. Product specifications
Description
2-37
Advertisement
Table of Contents
