Table of Contents
Advertisement
2. Product specifications
2-4-2. Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the
Standalone mode is set.)
To Exit from this menu : power off and turn on again.
NOTE
Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Category
Item
Hospitality
Hospitality
Mode
Mode
SI Vendor
SI Vendor
Power On
Channel
Power On
Channel
Num
Power On
Channel
Type
Power On
Volume
Power On
Power On
Volume
Num
Min
Volume
Max
Volume
Power On
Source
Power On
Option
Channel
Channel
Setup
2-32
Initial value
Select Hospitality mode.
Standalone
•
Interactive mode : TV works with an SI STB or SBB.
•
Standalone mode : TV works alone, without an SI STB or SBB.
•
Interactive mode : Samsung / 2M / Locatel / VDA / VDA-S / Acentic
/ Innvne / Quadriga / ETV / Ibahn / Magilink / Otrum / Siemens /
OFF
Amino / MDC / Enseo
•
Standalone mode : OFF / Movielink / Swisscom / Smoovie / SSCP
Set the default values that will be applied when the TV is turned on.
•
User Defined : Lets you set Power On Channel and Channel Type
Last Saved
manually. See Power On Channel and Channel Type below.
•
Last Saved : If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
1
When the TV is turned on, it switches automatically to this channel.
Select channel band : AIR (analogue air band), DTV (digital air band),
CATV
ATV
(analogue cable band), CDTV (digital cable band)
•
User Defined : Lets you set the Power On Volume manually. See
Power On Volume below.
Last Saved
•
Last Saved : When the TV is turned on, it returns to the volume that
had been set when the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality
10
mode.
The minimum Volume Level the user can set in Stand Alone Hospitality
0
mode.
The maximum Volume Level the user can set in Stand Alone Hospitality
100
mode.
TV
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
•
Last Option : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
Last Option
•
Power On : When the power returns, the TV turns on.
•
Standby : When the power returns, the TV enters the Standby
mode.
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tunning, Antenna
selection, etc.
Description
Advertisement
Table of Contents
