Description & Screws
14
Remove the DC VSS-PD BOARD (SMPS).
•
Gently lift out 4 corners of the board to
release its locks.
•
Use both hands to hold the board and slide
it toward the right side to remove. (It's easier
for you to use both hands - a middle finger
for left side and a thumb for bottom side to lift
and slide out simultaneously).
NOTE
When installing the DC VSS-PD BOARD
(SMPS), verify the board is properly positioned
in all 7 mounting slots(
15
Remove the ASSY PCB MAIN.
•
Gently lift the top right corner of the board out
to release the lock.
•
Use both hands to hold the board and slide to
the left to release it.
NOTE
When installing the DC VSS-PD BOARD
(SMPS), verify the board is properly positioned
in all 4 mounting slots(
16
Remove the screws on T-CON BOARD and then
remove the T-CON BOARD.
•
65" : 4 EA
Screws
6001-003016
SCREW-MACHINE : M3 x L5, ZPC(WHT)
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
).
).
Picture Description
Bottom chassis Guide the fixing Holes
1
Locking
Bottom chassis Guide the fixing Holes
2
2
1
3. Disassembly and Reassemble
2
2
Locking
1
3-5