Samsung UE65KS9502T Service Manual page 8

3. Disassembly and Reassemble
Description & Screws
11
Remove the Cables.
• LEAD CONNECTOR-DIMMING(
(LD - MAIN - FT)
• LEAD CONNECTOR-POWER(
(SMPS - LD)
• LEAD CONNECTOR-POWER(
(SMPS - MAIN)
12
Remove the FFC CABLE
(BLU/Dimming),
B
• FFC CABLE(
(Main - T-CON)
13
Remove the ASSY SMPS P-PD BOARD (LD
Board).
• Gently lift out 4 corners of the board to
release its locks.
• Use both hands to hold the board and slide it
toward the upper side to remove. (It's easier
for you to use both hands - a middle finger
for upper side and a thumb for bottom side
to lift and slide out simultaneously)
NOTE
When installing the ASSY SMPS P-PD
BOARD(LD Board), verify the board is properly
positioned in all 4 mounting slots(
3-4
)
A
)
B
)
C
(Main-T-CON VX1),
A
(Open Cell USIT).
C
)
A
).
Picture Description
C
A
B
A
Bottom chassis Guide the fixing Holes
2
1
Locking
B
C
1
2