Samsung UE65KS9502T Service Manual page 14

3. Disassembly and Reassemble
Description & Screws
14
Remove the Screws on LD(Local Dimming)
Board, and then remove the board. (FFC Cable
was already removed)
• 78" : 6 EA
15
Remove T-Con Board.
• Gently lift out 4 corners of the board to
release its locks (Locking
• Use both hands to hold the board and slide it
toward the upper side to remove. (It's easier
for you to use both hands-a middle finger
for upper side and a thumb for bottom side
to lift and slide out simultaneously.)
16
Removing ASSY PCB MAIN BOARD.
• Gently lift up (Top Right corner) to release the
lock (Locking
• Use both hands to hold (Bottom chassis
Guide Fixing Hole
the left to release the board.
NOTE
When installing the ASSY PCB MAIN BOARD,
verify the board is properly positioned in all 4
mounting slots.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3-10
).
).
) the board and slide to
Picture Description
Locking
Bottom chassis Guide Fixing Hole
Locking