Yamaha MDF3 Owner's Manual page 42

4. Program other steps.
Repeat steps 2 and 3 as needed to pro-
gram additional steps. Your program may
contain up to 99 steps.
Prog:02=07~MissU
Hint:
If you want to change a step once
you've programmed it, press the CURSOR
[<<] key to move the cursor to the step num-
ber area, then select the step you want to
change using the FILE DATA keys. Then press
the CURSOR [>>] key and select a different
file.
42
5. Start playback.
When you've finished creating your program, press the SEQ mode key and start
playback. The MDF3 will play the songs you selected in the programmed order.
01:~~~~~SONGå01
Hint:
If you set the "Repeat play" function to
either "1" or "all", you entire program of songs
will be repeated indefinitely in the pro-
grammed order. If the "Repeat play" function
is set to "off", however, the program will be
played only once.
Note:
The program setting is temporary. It
will be erased when the MDF3 is turned off,
or when you remove the disk from the disk
drive.