Disc Transport Section; Disc Transport Buttons - Yamaha MD4S Owner's Manual

16
Welcome to the MD4S

Disc transport section

A

Disc transport buttons

REHE
REC
PLAY
PAUSE
—Owner's Manual
MULTITRACK MD RECORDER
8
7
6
REPEAT MARK SEARCH
5
4
A B LAST REC SEARCH
IN
3
AUTO
PUNCH I/O
SONG SEARCH
2
REHE REC
1
* Please remove the protective film from the panel.
If the film is left on, the adhesive may break down and soil the unit.
button ...... This button is used to rehearse punch-in/out. During rehearsal the REHE
indicator located above the button will light, and while rehearsal is paused
the indicator will blink.
button ......... This button is used to record. When you press the REC button during
playback, recording will begin from that location on any recordable
track(s). (See "Manual punch-in/out" on page 52 for more information.)
The REC indicator located above the button will light during recording,
and will blink to indicate record pause.
button .......This button is used to begin normal playback, recording, and rehearsal.
After pressing the REHE button, pressing the PLAY button will enter
rehearsal mode. After pressing the REC button, pressing the PLAPY button
will begin recording. If you press the PLAY button without pressing the
REHE or REC button, normal playback will begin. During playback/
recording/rehearsal, the PLAY indicator located above the button will light.
When playback/recording/rehearsal is paused, the PLAY indicator will blink.
button.... This button temporarily halts (pauses) playback/recording/rehearsal. After
operation has been paused, pressing the PAUSE button once again will
resume playback/recording/rehearsal from that location. If you do not
operate any buttons for about 10 minutes while the unit is in Pause or Rec
Pause mode, the mode will be canceled automatically.
9
REC SELECT
CH1 CH2
1 2
BUS
L R
EJECT
PITCH ADJUST
MARK
OUT SET
PAUSE
PLAY STOP
DATA
TOC WRITE
PHONES
CH3 CH4
J
3 4
L R
K
L
PEAK HOLD DISPLAY
M
EDIT UTILITY
N
O
EXIT
P
ENTER
Q
R
CURSOR
PUNCH I/O