Table of Contents
Advertisement
CAUTION
Make sure vacuum is turned off
and power cord is unplugged.
WARNING: Never operate
vacuum cleaner without all filters,
filter screen and dust cup in
proper position.
If the vacuum is not cleaning
floors or if there is no suction at
the end of the hose, check the air
path for any blockage.
•
The cup release buttons are located on both sides at the bottom of the handle.
Press and squeeze the purple buttons and pull dust cup out away from the
machine (Fig. 1). See dust cup maintenance instructions on page 10.
•
Empty the debris in the dust cup by holding the dust cup over the waste basket
and press lever to release the bottom lid (Fig. 2).
•
Check filters and filter screen. Remove any debris and shake off dust. See filter
maintenance instructions on page 11.
If there is still no suction, check for blockages in the floor nozzle
•
Remove the canister from the vacuum and step on the nozzle to lower handle
and lay down the vacuum (Fig. 3).
•
Check the hose for clogs (Fig. 4).
•
Turn vacuum over on the floor, remove the brushroll and check air
passageway and remove any obstructions (Fig. 5).
3
How to clean a blockage
1
1.Squeeze
2.Pull out
4
.
2
5
13
Advertisement
Table of Contents
