Playback Controls; Click Playback; Song Playback - Yamaha DTXTREME IIs Owner's Manual

Playback Controls

Use the transport control for playback of the song or click.
CLICK
TAP GROOVE CHECK
1 2 3

Click Playback

You can play the metronome click sound solo, or in sync with
the current song.
1.
Press the CLICK button 1 to start click playback at the
current tempo. The Click indicator will also blink at this
tempo.
Blinks in red on first beat of measure
CLICK
Blinks in green for remaining beats of measure
TAP
2.
Press the CLICK button again to stop the metronome
click.
n If you press the CLICK button during song playback, the click
will sound in time with the song. If you start song playback
while playing the click, the click will start in sync with song
playback.

Song Playback

In addition to the basic start/stop control of the song, the
DTXTREME IIs lets control how the song is played, which
part is played, and so on.
Transport Control
1.
Press the Start/Stop button 4 to start playback of the
current song. The Start/Stop indicator will also light up.
2.
Press the Start/Stop button again to stop song playback.
The Start/Stop indicator will turn off. If you press the
Start/Stop button once more, playback will resume from
the stopped point.
4 5 6
24
While the song is stopped, you can use the following
transport buttons to move the playback point:
2 Reset — to the beginning of the song.
3 Rewind — to the first beat of the previous measure.
4 Forward — to the first beat of the next measure.
n You can use the Record button 6 when you start recording a User
song (page 60).
Song Settings
For specific song settings, you can switch to the song setting
display from the default display by pressing the Page button
(▼). Here you can specify how you want to play each track,
and check other song-related information.
Song name
Song number Shows current measure number/beat
SONG=P1 Songname M001-01
|- | Tr1=play Tr2=none
1 2
n Song-related information is shown in the upper row of the display.
Tempo and beat settings are contained in the song. You can
temporarily change them from the default screen.
1 Playback Method
Determines how the song plays back. In normal playback,
the song plays from beginning to end and stops automatically.
Repeated playback repeats song playback from beginning to
end until you stop it manually.
❏ Settings:
(normal playback),
2 TRACK 1 & TRACK 2
Determines whether specific tracks of the song of the song are
played or muted. If a track is empty, "none" is displayed and
the setting cannot be changed.
❏ Settings: play, mute
=107 4/4
Tempo
Time signature
(repeated playback)