Levelrng (Level Range); Velrange (Velocity Range) - Yamaha DTX Owner's Manual

5 LevelRng (level range)

Set the Maximum and Minimum input levels of
each input jack number. The levels are
determined in proportion to the value set here.
A Refer to P.38 for further details regarding the relation
between input level and velocity.
! Move the cursor to INPUT and Rotate the
Data Scroll Wheel or use the +1/YES and -1/
NO buttons to choose the input jack
number.
You can also enable the Learn mode (P.115)
to automatically select the input jack number
by hitting each pad or drum.
" Move the cursor to the Maximum or
Minimum level focus area and rotate the
Data Scroll Wheel or use the +1/YES and -1/
NO buttons to set the level.
# Repeat steps ! and " to set the Maximum
and Minimum levels for each input jack
number.
Minimum
level
Maximum
MISC.
level
CYMBAL
SNARE
KICK
A No sound will be produced if the input signal is below
the minimum level. If the input signal is above the maximum
level, the sound produced will be at the maximum velocity set
on the Velocity Range display page (the 6th page of this
mode).
Settings:
The following parameters can be set for input numbers
1 to 12.
Minimum level: 0 to 98
Maximum level: 1 to 99
INPUT
Feature Reference — Drum Kit Trigger Edit Mode

6 VelRange (velocity range)

Set the Maximum and Minimum velocity of
each input jack number. This responds to the
maximum and minimum input levels set on the
5th page and delivers each sound within the
velocity range set in this step.
A Refer to P.38 for further details regarding the relation
between input level and velocity.
! Move the cursor to the INPUT focus area
and rotate the Data Scroll Wheel or use the
+1/YES and -1/NO buttons to choose the
input jack number.
You can also enable the Learn mode (P.115)
to automatically select the input jack number
by hitting each pad or drum.
" Move the cursor to the Minimum Velocity or
Maximum Velocity focus areas and rotate the
Data Scroll Wheel or use the +1/YES and -1/
NO buttons to set the velocity.
# Repeat steps ! and " to set the Maximum
and Minimum Velocity levels for each input
jack number.
Minimum
velocity
Maximum
MISC.
velocity
CYMBAL
SNARE
KICK
Settings:
The following parameters can be set for input numbers
1 to 12.
Minimum velocity: 1 to 126
Maximum velocity: 2 to 127
INPUT
37