Technical Data - Husqvarna RIGG 900 FE Operator's Manual

Weight, roof frame, kg/lbs
Weight, frame assembly, kg/lbs
Weight, total, kg/lbs
Product dimensions (L×W×H), mm/inch
Rated voltage, V
Rated frequency, Hz
Electrical connection
Power consumption, drive motor, kW
Speed, m/min/ft/min
Maximum workload, kg/lbs
Dynamic test coefficient
Static test coefficient
Sound level, dB(A)
Remote control
Battery type
Frequency band, MHz
Channel separation, kHz
Functional sensitivity
Transmission principle
IP class
Ambient allowed temperature, °C/°F
Storage temperature, °C/°F
Note:
If your product requires an electrical
specification that is not in the table, speak to a
Husqvarna service agent for more information.
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
18

Technical data

declared values of other products tested in accordance
with the same directive or standards. These declared
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
RIGG 900 FE
371/818
650/1433
1021/2251
2129×2080×3813/84×82×150
400–460
50/60
16 A, 5 pole
0.18
0–9/0–30
1300/2866
1.1
1.25
<70
2 x AA/LR06 Alkaline
869
25
Better than -107 dBm BER 10
GMSK, TDMA
IP67
0–+45/32–+113
-40–+85/-40–+185
2150 - 002 - 08.02.2024
-4