Table of Contents
Advertisement
Power consumption blast motor
(voltage is given on the control box)
Max. blast cleaning output on steel
Max. blast cleaning output on concrete
Noise level (under load)
Operating temperature range
Recommended filter unit
The electrical diagrams of the electrical system are placed inside of the control panel.
Design and specifications are subject to change without notice by the manufacturer.
IMPORTANT NOTES:
The indicated values are measured on new machines. Noise and vibration levels will vary in different
circumstances. Area influences like open outside or closed inside space, ambient temperature, different
surfaces to be treated, daily use, different tools or accessories, poor maintenance, etc. will give different
values at all time and could increase the exposure level over the total working period.
The declared vibration and noise emission levels represent the main applications of the machine. The values
may be measurements from a representative sample of technically comparable machinery. The values may be
used for a preliminary assessment of exposure.
9. Technical data
Electrical connection
Blast width
Drive speed
Abrasive consumption
Length
Width
Height
Weight
Vibration level a
hv
Uncertainty (K)
Dust hose connection
EBE 350S
11KW
400-480V / 50/60Hz, 32A
350 mm
0 – 30 m/min
50 m²/h
150 m²/h
0,1 – 0,5 kg/m²
1350 mm
650 mm
1100 mm
415 kg
Over 90dB(A)
0,4 m/s²
0,1 m/s²
Allows >8 hrs. of working with the
mentioned equipment without having to use
anti vibration precaution measures.
-5°C to +40°C
Ø130 mm
Contact us for a suitable filter unit
30
Advertisement
Table of Contents
