Zte BLADE A31 LITE Quick Start Manual page 6

Charging the Phone
Your phone's battery should have enough
power for the phone to turn on, find a signal,
and make a few calls. You should fully charge
the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB
cables. The use of unapproved accessories
could damage your phone or cause the battery
to explode.
1. Connect the adapter to the charging jack.
Ensure that the adapter is inserted in the
correct direction.
2. Connect the charger to a standard AC
power outlet.
3. Disconnect the charger when the battery is
fully charged.
NOTE:
If the battery is extremely low, you may be
unable to power on the phone even when it
is being charged. In this case, try again after
7
charging the phone for at least 20 minutes.
Contact the customer service if you still cannot
power on the phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before
powering on.
• Press and hold the Power key to turn on
your phone.
• To power off, press and hold the Power
key to open the options menu, and touch
> .
NOTE:
If the screen freezes or takes too long to
respond, reinstall the battery and power on
again.
Waking Up Your Phone
Your phone automatically goes into sleep mode
when it is not in use for some time. The display
is turned off to save power and the keys are
locked to prevent accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set an unlock pattern, a PIN or a
password for your phone, you'll need to draw
the pattern, or enter the PIN/password to
unlock your screen.
8