Zte BLADE A31 LITE Quick Start Manual page 5

Setting Up Your Phone
The nano-SIM card for slot 1 can be installed or
removed while the phone is turned on. Remove
the battery before installing or removing the
nano-SIM card for slot 2.
Power off your phone before removing or
replacing the battery.
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You
can get a standard nano-SIM card from your
service provider.
1. Place your finger into the slot at the bottom
of the back cover, and gently lift and
remove the cover.
5
2. Install the nano-SIM card(s) and the
microSDXC card as shown.
nano-SIM
slot 1
microSDXC
card slot
nano-SIM
slot 2
NOTE:
Both nano-SIM slots support LTE networks and
either can be used for mobile data.
3. Insert the battery, making sure the
connectors align. Gently push down on the
battery until it clicks into place.
4. Replace the back cover.
6