Using A Water Lter; Venting; Transport - Melitta LatteSelect F63/0-201 Operating Instructions Manual

You can set the water hardness by navi-
gating to Settings > Water hardness in the
menu.
Water hardness °d
Soft 0 to 10
Medium 10 to 15
Hard 15 to 20
Very hard > 20

8.10 Using a water lter

The use of a water lter extends the service
life of your appliance. The water lter lters
calcium and other pollutants out of the tap
water.
If you use a water lter and change it on a
regular basis, you will need to descale the
appliance only once per year. This informa-
tion is based on an average of six 120 ml
co ee beverages per day and six lter
changes per year.
Only use Melitta® Pro Aqua lter cartridges
for automatic co eemakers. Observe the
instructions on the packaging of the lter
cartridge.
Use the screwing aid to screw the water
lter into and out of the water tank.
Inserting the water lter
Change the water lter when the appliance
asks you to do so. Use the co ee grounds
container as a collecting container.
Place the new water lter in a vessel
ƒ
lled with fresh tap water for a few
minutes.
Navigate to the Care > Filter > Insert lter
ƒ
menu.
°e °f
0 to 13 0 to 18
13 to 19 18 to 27
19 to 25 27 to 36
> 25 > 36
Changing the water lter
Use the co ee grounds container as a
collecting container.
Navigate to the Care > Filter > Change l-
ƒ
ter menu.
Removing the water lter
Navigate to the Care > Filter > Remove
ƒ
lter menu.
Then adjust the water hardness (see
ƒ
section 8.9, page 26).

9 Venting

During venting, residual water is removed
from the appliance. You should dry out the
appliance whenever you do not use it for
longer periods, if you want to transport it
or if there is a risk of frost.
If the water lter is inserted, you will need
to remove it from the water tank before-
hand.
Place a vessel beneath the outlet.
ƒ
Navigate to the System > Venting menu.
ƒ
After venting, the appliance will switch o .
Keep the water lter in a vessel containing
tap water in the refrigerator so that it does
not stand dry over a longer period.

10 Transport

Transport the appliance in the original
packaging if possible.
You may not fasten loose parts with
adhesive tape or parcel tape because the
adhesive residue is di cult to remove.
When sending the appliance to Melitta's
service centres, it is not necessary to send
in the cup plate. This prevents scratches
during transport.
Venting
27