Inserting, Changing And Removing The Water Fi Lter - Melitta Gourmet Operating Instructions Manual

11 Inserting, changing and removing the
water fi lter
The Melitta Claris
® ®
the water. Using the fi lter helps to reduce the required frequency of descaling. The
service life of your appliance will be extended thanks to the reliable protection from
limescale. If you do not wish to use a water fi lter, the appliance can, of course, also
be used without a water fi lter. The water fi lter should be changed regularly, however;
at the latest, when the appliance prompts you to do so. When the water fi lter is
inserted, changed or removed, this must be confi rmed in the Filter sub-menu. Once
the water fi lter is inserted or changed, the appliance resets the water fi lter cycle to
zero and is able to prompt you to change the water fi lter again at the right time. The
water fi lter is available in specialised shops.
11.1 Inserting the water fi lter
Care
Descaling
Filter
Exit
Filter
Exit
Insert filter
Change filter
• Carefully screw the Melitta
base of the water tank using the screw-in aid at the bottom end of the
coffee scoop provided.
• Fill the water tank to the max. mark with fresh tap water and reinsert it.
• Place a vessel under the Perfect Cappuccino and push the Perfect
Cappuccino downwards until it is positioned below the brim of the
vessel.
• Press the rotary switch to confi rm.
→ Open valve will appear on the graphic display.
water filter removes lime and other harmful substances from
• Select the Care sub-menu.
• Turn the rotary switch until Filter is highlighted
and press it to confi rm the selection.
• Turn the rotary switch until Insert fi lter is
highlighted and press it to confi rm the selection.
• Turn the rotary switch until Start is highlighted
and press it to confi rm the selection.
• Lift the lid of the water t (Fig. A, No. 6) and pull
the water tank up and out of the appliance.
Claris
®
water fi lter into the thread on the
®
197