Inserting The Melitta Claris Water Fi Lter - Melitta Caffeo Bistro Operating Instructions Manual

6 Inserting the Melitta
The Melitta Claris
®
the water. Please only insert it after starting up the appliance for the fi rst time.
When using the fi lter, the appliance does not require descaling as often, and the
water hardness can be set to 1 (you can fi nd more information on page 61). The
service life of your appliance will be extended thanks to the reliable protection from
lime scale. The water fi lter should be changed regularly; however, after two months
at the latest. The water fi lter is available in specialised shops.
• Set the current month on the blue ring on top of the Melitta
water fi lter. This way, you can easily see when it is time to change the
Melitta Claris
®
• Put the water fi lter in a glass with fresh tap water for several minutes
before you insert it.
• Lift the lid of the water tank (Fig. A, no. 3) and pull the water tank up
and out of the appliance.
• Empty the water tank.
• Carefully screw the Melitta
base of the water tank using the screw-in aid at the bottom end of the
coffee scoop provided.
• Fill the water tank to the max. mark with fresh tap water and reinsert it.
• Place a vessel under the Perfect Cappuccino and push the steam pipe
downwards until it is positioned below the brim of the vessel.
• Turn the valve switch (Fig. A, no. 6) clockwise to open the valve.
→ Water now runs into the vessel beneath the Perfect Cappuccino. Due to the
automatic stop function, you must open and close the valve switch several
times.
• As soon as the water tank symbol
anti-clockwise to close the valve.
→ The appliance is ready for operation.
56
water fi lter removes lime and other harmful substances from
®
water fi lter.
®
Claris
®
Claris water fi lter
® ®
water fi lter into the thread on the
®
illuminates, turn the valve switch
Claris
® ®