System Hookup; Configuring Your Yamaha Mixing Console - Yamaha 01V96 Installation Manual

System Hookup

The following illustration shows the available hookup methods you can use to connect your
Yamaha mixing console to your computer: serial, USB, MIDI.
(DM2000/02R96 only)
Note: Before you connect to serial or MIDI ports, turn off your Yamaha mixing console and
computer.
Configuring Your Yamaha Mixing Console
On your Yamaha mixing console, use the DISPLAY ACCESS [SETUP] button
([DIO/SETUP button on the 01V96) to locate the MIDI/TO HOST Setup page. Under
"Studio Manager," select a port and assign an ID to your Yamaha mixing console. If you are
using a serial connection, set the TO HOST SERIAL options as appropriate (i.e., "PC-2" for
a Windows PC, or "Mac" for a Macintosh computer).
Warning: Do not set the TO HOST SERIAL option to "Mac" while your Yamaha mixing con-
sole is connected to your PC's serial port. Doing so may damage your PC.
Yamaha mixing console rear panel
1. Serial
TO HOST
USB
2. USB
USB cable
3. MIDI
OUT
Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide
(Yamaha CCJ-Mac
or equivalent)
Mac serial port
Serial cable
PC serial port
(Yamaha CCJ-PC2
or equivalent)
USB port
IN
MIDI interface
MIDI cables
System Hookup
Mac or PC
7